Product SiteDocumentation Site

9.4. Example

Assuming we have an chassis containing four nodes and an IPMI device active on, then we would chose the fence_ipmilan driver in step 2 and obtain the following list of parameters
List of STONITH Parameters
Figure 9.1. Obtaining a list of STONITH Parameters

from which we would create a STONITH resource fragment that might look like this
STONITH Configuration
Figure 9.2. Sample STONITH Resource

And finally, since we disabled it earlier, we need to re-enable STONITH. At this point we should have the following configuration.
Now push the configuration into the cluster.